samedi 27 décembre 2014
Oil pulling coconut oil
Do you like this story?
I found this useful tip and decided to give it a try, knowing that in fact any results would be welcome and also knowing that the only harmful affects would be that I became addicted to cold-pressed oils! The business of marketing this natural therapy should be obvious in that it provides a very real and natural, and inexpensive solution for many ailments that effect the human body. Lack of money for expensive drugs is often the root cause of disease continuing, when prevention is and should always be the main focus.
Dr. Karach spoke about a remarkable treatment at a conference of the All Ukranische-Union of the Oncologists (Specialists for Tumor diseases) and Bacteriologists, a part of the Academy of Sciences of UDSSR. He talked about a super simple Healing process for the human body by sunflower oil.
The results of this healing process, causes astonishment and doubts, but by experimenting with the oil therapy everybody can see the results in his own body and can get convinced for him that these arguments are right.
It is more than surprising that with this totally harmless, biological healing method one could achieve such success and healing results. They are really without comparison. Most illnesses could be totally cured by this simple method and it was unnecessary, to use surgery or all kinds of medicines with their so much harmful side effects.
The real important thing of this method is in its simplicity; it is just sipping or sucking oil inside the mouth. The further healing process then is done alone by the human organism. In this way it is possible to heal all at once-cells, tissues and all other organs because of the destruction of the natural mouth germs and with this the destruction of the human organism is stopped.
Right now, the balance is not there and causes illness and in the last consequence it affects the duration of life. Man lives only half the time which he could live. He could become 140 or 150 years old, says Dr.Karach.
The Oil-therapy heals totally headaches, bronchitis, tooth pain, thrombosis, eczema, ulcers, intestinal diseases, heart and kidney diseases, encephalitis and woman's diseases. Preventively the growth of malignant tumors is cut and healed. Chronic blood diseases, paralysis, diseases of nerves, stomach, lungs and liver and sleeplessness are cured.
The healing process: Get refined sunflower oil (or peanut oil or distal oil). In the morning before breakfast you take one tablespoon of the oil - but donot swallow it. Without great effort or speed, you wash and suck the oil inside the mouth, pull it through the teeth and all that with closed mouth for 15 to 20 minutes.
After spitting the oil, the mouth has to be washed intensely with water several times and the teeth need to be cleansed with brush; also the sink, because the liquid contains big amounts of bacteria and harmful material. If we would look at a drop of this liquid through a microscope, we would see all kind of moving fibers - those are microbes in the first stage of their growth. Pulling Oil pulls out disease elements from the system (body) and restores health.
One of the obvious results is the fixing of loosened teeth, the stop of bleeding teeth flesh and whitening of the teeth.
The idea of harvesting oil from the earth is definitely nothing new. It's simple. Drill a hole in the appropriate spot in the ground, and out comes oil, oil that can be used to provide fuel for cars, plastics for medical supplies, and a vast amount of other products that make the modern life what it is. The modern idea of fracturing really hasn't changed very much. With the advent of technology and the need for more and more data, the industry has seen a surge of computers and sensors into the oilfield. Operating companies that perform the services need to provide the customer with data about the job. This data not only ensures that the job was done properly, but also gives valuable information on which decisions can be made in the future.
One of the biggest challenges with putting a computer or similar device in the field is the environment. Since a well site can be anywhere in the world, the environment can, and often does change drastically. Heat, cold, dust, rain/snow, electro-magnetic interference, and even people will beat most computers into submission, or failure within a month or so. Too much dust in a computer destroys its ability to cool itself. Even more in some hazardous area, where is concentrated of flammable gases, vapors, or dusts, computers without ATEX certified is forbidden to be equipped.
There are almost as many solutions to these problems as there are companies who try to solve them. Since the job of the computer is to collect, interpret, and protect the data, the ability of the computer to operate in harsh environments is key. Non-rugged computers such as desktops and laptops do not have measures inherent to their designs to protect the electronics, and thus the failure rates of these computers in the field are typically very high. The only way to ensure that a computer will be able to excel in harsh environments for mission-critical applications is to ruggedize it.
The newest type of computer being deployed to the oil field is the small form factor, or rugged embedded computer. Traditionally, an embedded computer is a small, low power, dedicated computer that is assembled into a larger assembly, or system. In past years, the technology of the embedded computer world has been out of reach for the oilfield because of the high cost and low performance associated with such systems. With some of the latest board and component advancements, these tools are now within reach. By using embedded boards capable of operating to ranges much broader than traditional boards, new cooling concepts can now be embraced. By using heat pipes and other technologies, fans are no longer needed in a system. The computer can now be completely convection cooled. That solves the last and most difficult problem to solve in the field. How does one keep dust from getting in, and ruining my computer? All other types of computers use fans to pull in and eject air, which brings with it, dust. With no fans, the embedded computer can now be sealed from the outside world. With no moving parts, lighter components, sealed enclosures, extended operating temperature ranges, and lower costs, the rugged embedded computer is becoming the ideal solution for computers in the oil field.
There are almost as many solutions to these problems as there are companies who try to solve them. Since the job of the computer is to collect, interpret, and protect the data, the ability of the computer to operate in harsh environments is key. Non-rugged computers such as desktops and laptops do not have measures inherent to their designs to protect the electronics, and thus the failure rates of these computers in the field are typically very high. The only way to ensure that a computer will be able to excel in harsh environments for mission-critical applications is to ruggedize it.
The newest type of computer being deployed to the oil field is the small form factor, or rugged embedded computer. Traditionally, an embedded computer is a small, low power, dedicated computer that is assembled into a larger assembly, or system. In past years, the technology of the embedded computer world has been out of reach for the oilfield because of the high cost and low performance associated with such systems. With some of the latest board and component advancements, these tools are now within reach. By using embedded boards capable of operating to ranges much broader than traditional boards, new cooling concepts can now be embraced. By using heat pipes and other technologies, fans are no longer needed in a system. The computer can now be completely convection cooled. That solves the last and most difficult problem to solve in the field. How does one keep dust from getting in, and ruining my computer? All other types of computers use fans to pull in and eject air, which brings with it, dust. With no fans, the embedded computer can now be sealed from the outside world. With no moving parts, lighter components, sealed enclosures, extended operating temperature ranges, and lower costs, the rugged embedded computer is becoming the ideal solution for computers in the oil field.
This post was written by: Author Name
Author description goes here. Author description goes here. Follow him on Twitter
Inscription à :
Publier les commentaires (Atom)
0 Responses to “Oil pulling coconut oil”
Enregistrer un commentaire